37
name. The mark is gray when it is not triggered, and displays orange when triggered.
Moreover, two horizontal lines display on each of the data graphs (when Waveform
Graph Mode is applied) to indicate the alarm point. The limit lines are shown in different
colors to differentiate them from the parameter waveforms.
C.
Function Buttons
The operations of the available Function Buttons on the Live Data screen are
described below:
Cancel All
— tap this button to cancel all selected parameters. Up to 50
parameters can be selected at one time.
Show Selected/Show All
— tap this button to switch between the two options:
one displays the selected parameters, the other displays all the available items.
Graph Merge
— tap this button to merge selected data graphs (for Waveform
Graph Mode only). This function is very useful when comparing different
parameters.
NOTE
This mode supports graph merge of 2 to 5 parameters that can be represented digitally.
Non-digital parameters are not supported.
➢
To merge selected data graphs
1.
Select parameters that need to be merged.
2.
Tap the
Graph Merge
button at the bottom of the Live Data screen.
a)
This mode only supports parameters that can be represented digitally. If
non-digital parameters are selected, a message will display advising the
user that the selected parameters are not supported in this mode and to
select 2 to 5 digital parameters. Tap
Got It
to return to the previous screen
and select supported parameters.
b)
When unsupported parameters are selected, a message will appear
advising the user to select only supported parameters. A message will
also display if more than 5 parameters have been selected. Please select
2 to 5 of the supported parameters and tap the
OK
button to merge.
3.
Tap the
Cancel Merging
button at the bottom of the Live Data screen to
cancel merging.
To top
— moves a selected item to the top of the list.
Setting
— tap this button to set recording duration.
