15
flexible way to meet different standards, which allows the user to
select 0, 1, 2, or 3 “not complete” monitors in test.
2)
Reset Factory Default
From
Configure Monitors
screen, use the
SCROLL
button to select
Reset Factory Default
, and press the
ENTER/Exit
button.
It will restore the default configuration settings in the
Configure
Monitors
menu, and delete any customized settings. In this case, the
Allowed INC Monitors
will be set to 1.
The tool will display an information message to ask for your
confirmation. Use
SCROLL
button to select
Yes
to proceed or
No
to
exit without change.
Unit of Measure
Metric is the default measurement unit.
1)
From
System Setup
screen, use the
SCROLL
button to select
Unit of Measure
and press the
ENTER/Exit
button.
2)
From
Unit of Measure
screen, use the
SCROLL
button to select
the desired unit of measurement. (Figure 3.5 )
Figure 3.5
3)
Press the
ENTER/Exit
button to save your selection and return
to previous menu.
Key Beep Set
Unit of Measure 1/2
English
Metric
