Dragonfish Series Maintenance Manual
Introduction
Dragonfish series tilt-rotor UAS (Unmanned Aircraft Systems), as the industry-level UAS aviation
products, is highly professional, which can be reflected by not only the products themselves but in
the whole life cycle. To address its superiority, both operators and maintenance workers of the
product series must be equipped with full aviation knowledge and certain understandings of aviation
products.
The
Dragonfish Series Maintenance Manual
(hereinafter referred to as “the Manual”) is a tool
document prepared based on the aforesaid requirements, which can be referred to by the
maintenance workers and users of Dragonfish series products (hereinafter referred to as
“Dragonfish”) for necessary inspection and maintenance in their whole life cycle so that Dragonfish
could work efficiently with a longer service life.
This Manual mainly contains the professional opinions and attentions concerning inspection and
maintenance of Dragonfish, which can be consulted by users for their daily maintenance.
Corresponding forms are also available to record maintenance status of Dragonfish within the whole
life cycle and finally be sorted as the maintenance files of the UAS.
Prior to the use and maintenance of Dragonfish, please carefully read the descriptive documents,
including
Operating Instructions
and
Maintenance Manual
.
Scope of Application
This section describes the scope of application of this Manual, including the scope of applicable
models, applicable conditions of this Manual and the correspondence of operators and maintenance
workers in operation and maintenance.
Applicable Models
This manual is applicable to Dragonfish Standard series UAS manufactured by Shenzhen Autel
Robotics Technology Co., LTD.
Applicable Users
This Manual is applicable to the users of models specified herein. All operations in this Manual
must be subject to the scope specified in the table below.
Operations
Personnel
Daily inspection and maintenance
Users having undergone product use training and
maintenance workers certified or authorized formally
Regular inspection and maintenance
Maintenance workers certified or authorized formally
On-site accident disposal
Users having undergone product use training and
maintenance workers certified or authorized formally
Loss assessment of accident
Maintenance workers certified or authorized formally
Maintenance of products after accident
Maintenance workers certified or authorized formally
Verification after accident
Maintenance workers certified or authorized formally
File record
Users having undergone product use training and
maintenance workers certified or authorized formally
Applicable Environment
All operations in this Manual must be performed under the required conditions instead of in an
illegal and unsafe environment. This section sets down the basic demands of some operations. Any
special operation environment will be further illustrated in the following chapters in detail.
Operations
Environment Requirements
