background image

Thank you for purchasing the Gadgetree Mini Drone.

INCLUDED

  Mini drone

  Transmitter remote control (requires 4 AA batteries, not included)

  USB charging cable 

  Instruction manual 

  4 extra blades

  Blade protective frame

  Replacement thumb sticks

  1 hand line

  3 landing skids

BATTERY INSTALLATION

1. Use a screwdriver to remove the  

screw on the side of the transmitter 

then open the battery cover.

2. Install 4 AA batteries (not included)  

and replace the battery cover.  

We recommend InfiniCell batteries  

for maximum perfromance.

3. Re-install the screw.

CHARGING

1. Connect the charging cable in the transmitter to the Mini Drone or 

charge by connecting the included USB charging cable to a PC or AC 

USB adapter. The green LED on the transmitter or the red LED on the 

USB charging cable will turn ON and will turn OFF when changing is 

complete. It will take approximately 30-60 minutes to completely charge 

the Mini Drone.

CAUTIONS WHILE CHARGING

  Charge only in a dry, well ventilated area away from heat or explosive 

products

 

DO NOT

 charge the battery if the mini drone is still warm from flying. 

Doing so may cause the battery to swell or catch on fire

  A battery when not in use for a long time will lose its charge automati-

cally. Charging or discharging for a long time may reduce the life of the 

battery

INSTALLING LANDING SKIDS AND BLADE PROTECTIVE FRAME

1. Install landing skids to the bottom of the Mini Drone.

2. Install the blade protecting frame to the Mini Drone.

MODES

The transmitter has two built in modes. Mode 2 

is the default mode, To switch to Mode 1, simply 

press and hold the middle button on the throttle 

then turn ON the transmitter.

FLYING YOUR MINI DRONE

1. Turn ON the Mini Drone.

2. Turn ON the transmitter. The LED will flash 

quickly.

3. Once the LED stops flashing, push the throttle lever up 

then back down quickly. You will hear a beep indicating that 

the Mini Drone has entered into the pre-fly state.

NOTE:

 Ensure that the Mini Drone is on a level surface 

when syncing to ensure a stable flight.

 

 

MINI DRONE

Operating Instructions

8065509

Battery cover

4 AA batteries

(not included)

Backward trimmer

One key automatic 
return

  MODE 1 

 

OPERATING INSTRUCTIONS

  FINE TUNING

Forward trimmer

Headless mode

Up/Down/Left/Right 
sideways/High/Low 
speed switch

Right sideways 

fly trimmer

Left sideways fly trimmer

Hover up and down

Turn left and right

Forward/backward

Sideways

Turning

Push the throttle lever up or down

Push the left lever left or right

Use the backward/forward 
trimmer to correct the Mini 

Drone if it keeps flying 

forwards or backwards

Use the left/right sideways 

fly trimmer to correct the 

Mini Drone if it keeps flying 

left or right

Use the right/left trimmer to 

correct the Mini Drone if it 

keeps rotating

Forward and backward

Left and right sideways

Push the direction lever up or down

Push the right lever left or right

Power/Charge 
LED indicato

r

Right trimmer

Left trimmer

Forward/Backward/
Left/Right/3D 
Eversion

CAUTION

  If the LED on the transmitter is flashing slowly, syncing was unsuccess

-

ful. Please turn OFF both the Mini Drone and transmitter then repeat 

steps 1-3

  If the drone is pulling to one side or spinning while hovering, please 

turn OFF both the Mini Drone and transmitter then repeat steps 1-3

  When the LED on the Mini Drone blinks slowly the battery is low

  Please charge the battery with the USB cable provided

Red light is on the left. Green light is on the right.

Отзывы: