USER MANUAL
Scissor
ASLP-3005
ASLP-3005/IG
ISSUED 04-02-2004
AUTEC Hefbruggen bv
Industrieterrein Ijsselveld, Vlasakker 11, 3417 XT MONTFOORT, The Netherlands
Tel:+31 348 477000 Fax:+31 348 475104 E-mail: [email protected]
4. TECHNICAL SPECIFICATIONS
ASLP-3005
LIFTING CAPACITY :
3.000 kg
Lifting time :
45 sec
Lowering time :
45 sec
Total weight :
700 kg
Noise level :
74-dB(A)/1m
Working temperature :
-10
o
C / +40
o
C
Working environment :
covered
Dimensions :
Fig. 4
ELECTRICAL MOTOR ASLP-3005
Motor power :
3.0 KW
Voltage:
230V/400V(3-Ph). +/- 5%
Frequency :
50 Hz
Amperage :
230V: 13.5 A
400V: 7.8 A
No. of wires :
4
Speed :
1400 rpm
Fig. 4
THE WEIGHT OF THE VEHICLE
The lift can be used for practically all
vehicles provided that the maximum
loading capacity is not exceeded.
MAXIMUM DIMENSIONS OF THE
VEHICLE TO BE LIFTED (see Fig. 5)
Maximum breadth : 2200 mm
Maximum wheel base : 3000 mm
Keep in mind that low-slung cars (cars
with chassis close to the ground) do not
match with the lift structure. Take
particular care in case of low-slung
sports cars.
Fig. 5
Always keep in mind the lifting capacity
of the lift in the case of vehicles with
special characteristics (such as delivery
vans and other types of vans, etc.).
The safety zone (Fig. 6) is to some
extend determined by the
dimensions of the vehicle to be lifted.
Fig. 6
CHECK THE MAXIMUM LOADING
CAPACITY, THE MAXIMUM WEIGHT
AND THE DISTRIBUTION OF LOAD IN
THE CASE OF LARGE VEHICLES.
MAX.3000 kg ASLP-3005
5. SAFETY
It is important to read point number 5 of
this Manual properly since it contains
important information about the risks
which the operator of the lift will be
exposed to if the lift is not used
properly. In what follows, you will find
information about how to avoid
dangerous situations.
WARNING
The lift is designed and
constructed to lift vehicles
and to hold them in a certain
position in a covered working place. Any
other form of use is not permitted. In
short, the lift is not suitable for the
following purposes :
n
Washing and spraying work.
n
To be used as a device for applying
force.
n
To be used as a goods lift.
n
To be used as a jack or for lifting
vehicles for changing wheels.
The manufacturer hereby refuses
entertain any claims for damages
arising in connection with injury to
persons or damage to vehicle or other
property caused due to incorrect and/or
unauthorised use of the lift.
During lifting- and lowering movements,
the operator must be within the zone of
operation (1), as shown in
Fig. 6
. The
presence of any person in the safety
zone
(2)
is strictly forbidden. The
presence of persons under the vehicle
is only permitted if the vehicle is parked
in the lifted position.
USE THE LIFT ONLY IF ALL THE SAFETY
ARRANGEMENTS ARE WORKING
PROPERLY. IF THESE RULES ARE NOT
FOLLOWED, SERIOUS INJURY COULD
BE CAUSED TO PERSONS AS WELL AS
IRREPARABLE DAMAGE TO THE LIFT
AND THE VEHICLE ON THE LIFT.
GENERAL PRECAUTIONS:
•
The operator is bound to follow the
regulations which apply in the
country in which these lifts are
installed.
In addition, the operator must :
•
Always work in the operator area as
designated in the Manual.
•
Never remove the protective guards
or dismantle or shut down the
mechanical, electrical or other types
of safety arrangements.
•
Read the safety regulations relating
to the lift and take cognisance of the
safety information provided in this
Manual.
en/TA-ASLP-3005-03
