Austroflamm Slim left 2.0, Руководство по эксплуатации

Страница: 35 / 66

Operating manual Slim left + right 2.0 EN 10 | Settings
35
10.2 Adjusting the door spring
1) To adjust the door spring, the hob must be removed
and only the left side cladding detached. Proceed as
described in the section Removing the side cladding
[
} on page 55].
1
2
Fig. 40: Adjusting the closing pressure of the
door
2) At the bottom of the door there is a bolt which can
used to adjust the door closing pressure. Use an
open-end wrench to secure the bolt at the lower end
(1).
3) Using a screwdriver, the closing pressure can be ad-
justed with the screw (2).
4) Reattach left side cladding and the hob.
ð Closing pressure is adjusted