Austria Email eco clever 100, Инструкции по эксплуатации и монтажу

Страница: 16 / 24

16
Id. no.: 242440-7
PRODUCT DATA ERP
Model
ECO CLEVER
80 100 120 150
Storage tank volume l 80 100 120 150
Mixed water volume V
40
122 152 183 228
Load profile M M M M
Energy efficiency grade B B B B
Energy efficiency % 39.8 38.9 38.3 38.7
Daily electricity consumption Q
elec
6.039 6.220 6.330 6.248
Annual electricity consumption kWh 1316 1347 1366 1352
Power consumption with smart Q
elec-week-smart
30.195 31.100 31.650 31.240
Power consumption without
smart
Q
elec-week
35.875 36.785 37.835 39.375
Temperature setting of the tem-
perature regulator
°C 65 65 65 65
Sound power level indoors dB 15 15 15 15
Special precautions
See Manual See Manual See Manual See Manual
Comments
The values stated are guide values, measured in accordance with the specifications of the ErP (energy-re-
lated products) Directive.
The actual values depend on the individual circumstances (number of people in the household, sanitary
fittings in the flat or house, plumbing insulation, etc.) and can therefore deviate from the values stated.
DOMESTIC HOT WATER SIDE CONNECTION (PRESSURE RESISTANT)
In cases in which unsuitable or non-functional storage tank connection fittings are used as well as in cas-
es in which the stated operating pressure is exceeded, we shall refuse to guarantee the water heater in
any way whatsoever. All tanks and boilers which have the description “max. operating pressure 6 bar” or
“max. operating pressure 10 bar” on the rating place are pressure resistant tanks. The connection and/or
connection components (e.g. safety valve, pressure reducer) must be designed and dimensioned accord-
ing to national standards and regulations (e.g. DIN 1988-20; ÖNORM EN 806-2).
Warning: The pipe water pressure must be suitable for the safety valve. If necessary, install a pres-
sure reducer. The water connection must only take place via a certified membrane safety valve or a
membrane safety valve combination - connection fitting for pressure resistant storage tanks.
A safety valve combination consists of shut-off, back-flow, drainage and safety valves with expandable
water outlet and is installed between the storage tank's cold water inlet pipe (blue) and cold water inlet in
an appropriate sequence.
Speicher
Sicherheitsventil Entleerungsventil Rückflussverhinder
er
Prüfventil Druckminderventil Absperrventil
Gebrauchsarmatur
en