3
YL-250 5000KG 2 BASE PLATE CAR HOIST
Installation and operation manual
Do not attempt to install this lift if you have not been trained on
basic automotive lift installation procedures. Never attempt to lift
components without proper lifting tools such as forklift or cranes.
Stay clear of any moving parts that can fall and cause injury. These
instructions must be followed to ensure proper installation and
operation of your lift. Failure to comply with these instructions
can result in serious bodily harm and void product warranty.
Manufacturer will assume no liability for loss or damage of any
kind, expressed or implied resulting from improper installation or
use of this product.
DEFINITIONS OF HAZARD LEVELS
Identify the hazard levels used in this manual with the following
definitions and signal words:
Watch for this symbol:
It Means:
Immediate hazards which will result in severe personal
injury or death.
Watch for this symbol:
It Means:
Hazards or unsafe practices which could result in severe
personal injury or death.
Watch for this symbol:
It Means:
Hazards or unsafe practices which may result in minor
personal injury, product or property damage.
OWNER’S RESPONSIBILITY
• Follow all installation and operation instructions.
• Make sure installation conforms to all applicable Local, State, and
Federal Codes, Rules, and Regulations; such as State and Federal
OSHA Regulations and Electrical Codes.
• Carefully check the lift for correct initial function.
• Read and follow the safety instructions. Keep them readily
available for machine operators.
• Make certain all operators are properly trained, know how to
safely and correctly operate the unit, and are properly supervised.
• Allow unit operation only with all parts in place and operating safely.
• Carefully inspect the unit on a regular basis and perform all
maintenance as required.
• Service and maintain the unit only with authorized or approved
replacement parts.
• Keep all instructions permanently with the unit and all decals on
the unit clean and visible.
BEFORE YOU BEGIN
Receiving:
The shipment should be thoroughly inspected as soon
as it is received. The signed bill of lading is acknowledgement by
the carrier that the shipment has been delivered in good condition.
If any of the goods called for on this bill of lading are shorted or
damaged, do not accept them until the carrier makes a notation on
the freight bill of the shorted or damaged goods. Do this for your
own protection.
NOTIFY THE CARRIER AT ONCE
if any hidden loss or damage
is discovered after receipt and request the carrier to make an
inspection. If the carrier will not do so, prepare a signed statement
to the effect that you have notified the carrier (on specific date) and
that the carrier has failed to comply with your request.
IT IS DIFFICULT TO COLLECT FOR LOSS OR DAMAGE AFTER YOU
HAVE GIVEN THE CARRIER A CLEAR RECEIPT.
File your claim with
the carrier promptly. Support your claim with copies of the bill
of lading, freight bill, invoice, and photographs, if available. Our
willingness to assist in helping you process your claim does not
make responsible for collection of claims or replacement of lost or
damaged materials.
CAUTION
WARNING
DANGER
READ FIRST
Do not operate this machine
until you have read and
understood all dangers, warnings
and cautions in this manual
IMPORTANT NOTICE
HIGH-LIFT
