MAINTANENCE
Weekly Maintenance:
Clean handrails, the LED screen, treads, and the cover panels
Inspect the overall condition of the treadmill
Wipe off any dust or light dirt with a damp cloth and mildly soapy water. Dry with a dry cloth.
Vacuum under the treadmill
Annual maintenance
Inspect for any bearing damage beneath the treads and for any loose bolts
Inspect the belt for breakage or any loose bolts
Inspect the handles and make sure bolts are properly tightened
Inspect the front and rear roller bearings and apply grease if the bearing is not rotating
smoothly. Each bearing in the treadmill has been lubricated at the factory. They do not need to be
lubricated except for the axle bearings. The bearings on the front and rear axle can be
lubricated once a year or as needed. There are 2 in the front, 2 in the back. The side panels must
be removed for lubrication.
Note: Excessive grease may create a build up and collection of dust.
