STEP 14-ATTACH LP CYLINDER TO GRILL - (ALL MODELS)
•Fill empty LP Cylinder at your local LP gas supplier.
•Set bottom ring of LP Cylinder into Cylinder Bracket through round hole in Bottom Shelf (Fig. K ).
Turn Adjusting Knob clockwise to secure LP Cylinder inside Cylinder Bracket(Fig. K).
•Turn all control knobs and LP Cylinder valve to the “Off” position.
•Take the protective cap off the cylinder valve. (Fig. L) Hold Regulator in a straight line with LP
Cylinder valve so the connection does not cross thread. Insert nipple into the cylinder valve. Hand
tighten coupling nut in clockwise direction. Do not use tools.
•Make sure Regulator hose does not contact hot metal surfaces.
WARNING: Do not use grill if this connection can not be completed. Be sure to test
this connection for gas leaks before operation of Gas Grill.
23
PROTECTIVE CAP
LP GAS
VALVE
REGULATOR
ROUTE HOSE UNDER
BRACE ON MODELS
WITH WOODEN LEGS
LP
CYLINDER
FIG. K
FIG. L
ADJUSTING
KNOB
ROUTE HOSE ON
OUTSIDE OF LEG ON
ALL MODELS
TURN REGULATOR COUPLING
NUT CLOCKWISE TO TIGHTEN