10
Operation (continued)
NOTE:
You must press the “Mode” button on the bottom of the
unit for 3 seconds to disable the rotation of the light.
□
Reset button:
restore functions to default settings
- Press this RESET button, the camera will turn to
AP mode
- Press this RESET button for 5 seconds, the
camera will restore the functions to default settings.
□
Audio mode:
for selecting which audio message
will play when motion sensor detects movement.
- Pre-set default is “silent mode”
- Push once for “doorbell chime”
- Push again for “dog barking”
- Push once more for the message you recorded
(Message 1)
- Push again for additional message you recorded
(Message 2- you can record up to 2 messages at a
time)
□
Recording:
1. Press the SET/REC button for 3 seconds, and you
will hear a single beep. After the beep, start
recording your message by talking into the
microphone. Push the button again to stop recording,
and you will hear a series of 2 beeps, meaning the
recording is finished. If you do not push the button
again after you have recorded the message, the
recording will stop automatically after 10 seconds.
2. The Nightwatcher can hold 2 custom-recorded
messages. If you have recorded one message,
repeat above step for message 2.
3. If you hear a series of 3 beeps when you want to
record your message by pressing the SET/REC
button for 3 seconds, this means the self-recorded
messages are full, please erase previous messages.
□
Play/Erase:
allows you to listen to and erase
messages
1. If you have only recorded 1 message, push the
button one time to listen to recorded Message 1. If
you wish to erase it, press the PLAY/ERASE button
and hold it for 3 seconds. You will hear a series of 2
beeps, indicating the message has been erased.
2. If you have recorded 2 messages, push the button
one time to listen to the first message, and push it
again to listen to the second message. If you want to
erase a message, select that message, and after
listening to it, push the PLAY/ERASE button and hold
it for 3 seconds to erase it.
3. If message 1 is erased, message 2 will
automatically become message 1. The next message
you record will then become the new message 2.
