3
INSTALLATION
Paper Shredder
Operating Instructions
Installation
Warning
Operation
Maintenance
Troubleshooting
Service Center
Limited Warranty
Sheet Capacity
Paper Shred Size
Paper Entry Width
Credit Card Capacity
Voltage
8 Sheets of 20lb. bond paper*
7/32 in. x 1 27/32 in. pieces
(0.56 cm x 4.7 cm pieces)
8.7 in / 22.0 cm
1 at a time
120V~60Hz / 2.2 A
* ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF PAPER
Heavier paper, humidity or other than rate voltage may reduce capacity.
Shredders with pull-out wastebaskets feature a safety power cut off upon bin removal. Make sure the
basket door is securely closed shut. Shredder will not function unless the pull-out wastebasket is pushed
in all the way and properly set back into place (FIGURE 1).
A socket-outlet should be near the equipment and be easily accessible.
Connect the power cord to any standard 120 volt AC outlet.
It is not designed to operate with any other wastebaskets. The supplied wastebasket activates this switch,
which allows the shredder to be operable. Lining the wastebasket with a plastic bag will interfere and
may keep the shredder from functioning.
Caution:
Crosscut shredders have very sharp exposed blades on the underside.
Use care when mounting the shredder on the wastebasket.
FIGURE 1
