installation
and
user
manual
aurora
suspended
fires
17
16
installation
3
PITCHED CEILING INSTALLATION
For pitched ceilings we have 5 bracket sizes which your
installer will adjust to achieve the exact angle for your
installation.
· ·
·
Up to a 5 degree pitch = Flat bracket
· ·
·
5 to 15 degree pitch = 10 degree bracket
· ·
·
15 to 25 degree pitch = 20 degree bracket
· ·
·
25 to 35 degree pitch = 30 degree bracket
· ·
·
35 to 45 degree pitch = 40 degree bracket
A custom bracket is available for anything larger than a
45 degree pitch. When installing the bracket, it is very
important that the bracket is sitting plumb.
The installer may need to chock up one side of the
bracket, with non combustible material i.e. cement sheet.
»
LOWER FLUE
LOWER FLUE LENGTHS
We supply the lower flue in the standard sizes listed
below. The extra length will be pushed up into the
ceiling bracket, enabling you to set the correct distance
of the firebox to the floor.
FLUE LENGTHS
5�3͈
9�1͈
5�11͈
9�9͈
6�7͈
10�8͈
7�5͈
11�6͈
8�3͈
Custom
Sizes above 11
�
6͈ will
come in two pieces,
with an internal joiner.
INSTALLING THE INTERNAL LOWER ACTIVE FLUE
The lower active flue is delivered with additional length to
allow for small changes to set the correct firebox height.
1. First position the lower active flue inside the
suspension bracket to obtain the correct height.
2. When this is in place attach the lower flue.
3. For aesthetic reasons the lower flue should be
positioned with the seam facing away from the front
of the fire (this won’t be possible for installations in
the centre of the room). As you are facing the fire the
flue damper handle will be on the right-hand side of
the flue. For a centrally placed installation position
the seam on the side which will be least visible.
4. Once the desired height is achieved tighten the 6͈
grub screws. Use a level to ensure that the flue is
perfectly vertical.
CLASS A INSULATED
CHIMNEY PIPE,
6
̎
ID, 8
̎
OD
CEILING
BRACKET
CEILING
COVER PLATE
AURORA
ADAPTOR
LOWER FLUE
