2.2 Installation Environment Requirements
2.2.1 For wall-mounting installation, the wall is required to be a
load-bearing wall. Special walls such as glass, marble,
porcelain, hollow walls, etc., cannot bear the weight of the
product. If such a situation requires special process installation,
additional costs may be incurred, and the specific cost is
calculated according to the actual situation.
2.2.2 Installation only provides hole-bearing wall boring,
hoisting or vertical bracket installation. If special installation
methods such as wall reinforcement and steel structure
installation are required, the corresponding expenses will be
calculated separately according to actual conditions;
2.2.3 If there are hidden risks for the installation method you
specified, after the prompts of our installation personnel, you still
insist on the installation, the responsibility shall not be borne by
supporting kits, our company shall not assume any responsibility
for damage to other items.
2.3 Structure Installation
2.3.1 Foot-mounting bracket installation
Overall Effect Diagram
Installation steps:
Step 1: Assembly bracket
①
Find the corresponding parts according to the details of the
bracket assembly parts, as shown below:
07
our company; if you use non-
I-TV
standard
Aurora
