7
User Guide
TX/RX2 ...]
Return
set videowall2 vw-name’s pictureparam: xx xx xx xx TX/RX1
TX/RX2 ...
Note
Configure the TX/Rx1, TX/RX2...image shift (Unit: 1 pixel for TX, 8
pixels for RX, a negative number indicates to move left or up) / scale
(Horizontal scale units: 1/Columns ; Vertical scale units: 1/ Rows) . if
there is no TX/Rx1, TX/RX2, it means the whole video wall. You can
set one or more parameters in h-shift v-shift h-scale v-scale at a
time, use “0” to represents the parameter which don’t need to
configure.
Command
vw2 get
Return
videowall2 information is:
vw-name1
row-number1 TX1 RX11 RX12 ...
row-number2 TX2 RX21 RX22 ...
...
vw-name2
row-number1 TX3 RX11 RX12 ...
Note
Obtain video wall information from IP Control Box.
Multiple View
HPX-RX-SM Multi-view.
Command
mv get
Return
mv information:
Rx1 tx1 tx2… txn
Rx2 tx3 tx4…txm
Note
Obtain all information of
HPX-RX-SM
.
Command
mv set rx tx1 tx2 txn
Return
rx1 tx1 tx2 tx3…
Note
One tx to multiple tx, supports 1, 4, 9, 16 displays, the numbers of
display is up to the tx number.
Serial
Pass through the serial command.
Command
serial -b param –r {on|off} “command-string” hostname1
hostname2 ...
Return
serial command received: <cr>
serial -b param –r {on|off} “command-string” hostname1
hostname2 ...
Note
Configure devices hostname1, hostname2 to pass through serial
command. After receiving the command-string, TX/RX pass through
the command directly to peripherals through RS232 port.
