2
User Guide
‘
、
’ ‘@’ ‘*’ ‘&’ ‘_’ ‘ ’(space)
Command
config set device remove hostname1 hostname2 ...
Return
The following device’s record will be removed: <cr>
hostname1 <cr>
hostname2 <cr>
...
Note
Remove the record of hostname1, hostname2…, Hostname can be
alias.
Command
config set device ip hostname1 {autoip|dhcp|static} ip4addr
netmask gateway, hostname2 ...
E.g.: config set device ip JPX-TX1-mac1 autoip, JPX-TX1-mac2 static
ip4addr netmask gateway, mytv dhcp
Return
Devices’ ipsetting will change to: <cr>
JPX-TX1-mac1 autoip <cr>
JPX-TX1-mac2 static ip4addr netmask gateway <cr>
mytv dhcp <cr>
Note
Set the IP address mode. If it’s a static IP, then followed by IP
address/netmask/gateway. It can set up multiple devices, use ”,”
comma to separate. It doesn’t take effect until the device reboot.
mytv is an alias of a Rx here.
Command
config set device reboot hostname1 hostname2 ...
Return
the following device will reboot now:<cr>
hostname1 <cr>
hostname2 <cr>
...
Note
Reboot TX/RX.
Command
config set device restorefactory hostname1 hostname2 ...
Return
the following device will restore to factory setting now:<cr>
hostname1 <cr>
hostname2 <cr>
...
Note
Reset TX/RX.
