4
User Guide
Matrix Parameter
Command
matrix set TX1 RX1 RX2,TX2 RX3 RX4,...
Return
matrix set: TX1 RX1 RX2,TX2 RX3 RX4,...
Note
Represent one or Multiple TX was displayed by one or Multiple RX.
Each TX and its connected RX compose a record, and separated by
a commas. Set TX to NULL, the followed RX disconnected from TX.
E.g.: “matrix set NULL RX1 RX2” means RX1 and RX2 are
disconnected from TX.
Command
matrix get
Return
the connected TX/RX information with below format
matrix information:
TX1 RX1
TX2 RX3
TX2 RX4
...
Note
Obtain matrix information. Based on current TX/RX in the network,
re-construct the network topology and feedback to the third-party
controller.
Video-Wall
Command
vw add vw-name n m tx
Return
videowall item vw-name create and assign tx to it
Note
Create a video wall configuration, and assign a TX.
Command
vw rm vw-name
Return
videowall item vw-name removed
Note
Remove video wall configuration.
Command
vw add vw-name tx1 position1 rx2 position2
Return
videowall item vw-name configuration added:
rx1 posion1
rx2 posion2
...
Note
Configure the video wall vw-name, add the correspondence of RX
and Displays, can set up many RX and their displays
correspondence by once. Position (format): x y, represents a
location, such location is an n*m video-wall, x row, and y column.
E.g.: vw add vw1 rx1 1 1 rx2 1 2, need to add a video wall by “vw
add vw1 1 2 tx1” first.
Command
vw add vw-name layout n m TX RX11 RX12 RX13 RX1m RX21 ...
RXnm
Return
videowall vw-name layout n*m tx rx11 rx12 rx13 rx1m rx21 ...
rxnm
Note
Add a video wall layout n*m, subsequently the RX based on display
order. The Parameter Rx could be character ‘0’, indicates no need to
change the corresponding RX.
