6
User Guide
rx21 ... rxnm
Note
Add a video wall layout n*m, subsequently the RX based on display
order. The Parameter Rx could be character ‘0’, indicates no need
to change the corresponding RX.
Command
vw2 add vw-name rx1 position rx2 position
Return
videowall2 item vw-name(n*m) configuration added:
rx1 position1
rx2 position2
...
Note
Configure the video wall vw-name, add the correspondence of TX,
RX and Displays, can set up many RX and their displays
correspondence at a time. Position (format): x y, represents
location is in x row, and y column of the n*m video-wall. This
command is suitable for one or multiple RX configuration.
Command
vw2 rm vw-name
Return
videowall2 item vw-name removed
Note
remove a video wall configuration
Command
rm vw-name rx1 rx2 rx3
Return
videowall2 config change:remove rx1 rx2 rx3 hostname from vw-
name
Note
Remove one or multiple rx from video wall.
Command
vw2 change vw-name tx1 tx2 tx3 txn
Return
videowall2 vw-name config change:
row1 tx1
row2 tx2
Note
Change the tx of video wall, tx 0 means no change.
Command
vw2 reset tx
Return
videowall2 reset tx
Note
Remove the video wall configuration of this tx, this tx display the
complete picture. (If this tx is configured to a certain row of a 3*3
video wall, it only displays one third of the whole picture.
Command
vw2 bezelgap vw-name ow oh vw vh [TX/RX1 TX/RX2 ...]
Return
videowall2 vw-name’s bezelgap: xx xx xx xx TX/RX1 TX/RX2 ...
Note
Set the size of TV frame (video edge). TX/RX1, TX/RX2 are optional,
if null, means the whole video wall, otherwise, it is for one or
multiple TX/RX.
Command
vw2 pictureparam vw-name h-shift v-shift h-scale v-scale [TX/RX1
