Aurora DXP-62, Руководство пользователя

Страница: 27 / 36

24
User Guide
Command Function Feedback Feedback Example
image width)
!WU##<cr>
Stretch
upwards from top
side (increase
image height)
~WU##<cr> Output Height Adjust xx
!WD##<cr>
Stretch
downwards from
top side (decrease
image height)
~WD##<cr> Output Height Adjust xx
!HMP0<cr>
Turn off HDMI
output
~HMP0<cr> HDMI power off
!HMP1<cr>
Turn on HDMI
output
~HMP1<cr> HDMI power on
!HDB0<cr>
Turn off HDBT
output
~HDB0<cr> HDBT power off
!HDB1<cr>
Turn on HDBT
output
~HDB1<cr> HDBT power on
!HMB1<cr>
Turn on
HDMI& HDBT
output
synchronously
~HMB1<cr> HDMI HDBT output on
CEC Commands
!CEC0<cr> Disable CEC ~CEC0<cr> HDMI CEC OFF
!CEC1<cr> Enable CEC ~CEC1<cr> HDMI CEC ON
!CECP<cr> Play&pause ~CECP<cr> CEC cmd: play&pause
!CECS<cr> Stop ~CECS<cr> CEC cmd: stop
!CECM<cr> Menu ~CECM<cr> CEC cmd: menu
!CERE<cr> Retreat ~ CERE <cr> CEC cmd: rev
!CECF<cr> Forward ~CECF<cr> CEC cmd: fwd
!CECU<cr> Up ~CECU<cr> CEC cmd: up
!CECD<cr> Down ~CECD<cr> CEC cmd: down
!CECL<cr> Left ~CECL<cr> CEC cmd: left
!CECR<cr> Right ~CECR<cr> CEC cmd: right
!CECC<cr>
Conform
command
~CECC<cr> CEC cmd: select
!CECE<cr> Exit command ~CECE<cr> CEC cmd: exit
Note:
1. Turn on/ off HDCP auto-management by sending serial commands.
a) When HDCP is set to active, whether output source is with HDCP depends on input source. If