Aurora DXP-62, Руководство пользователя

Страница: 19 / 36

16
User Guide
HDMI CEC :
Enable/disable CEC and auto-standby function. Default: CEC on, STANDBY on.
OSD Duration :
Includes 5 s, 10 s, 15 s and Off. “s” is for Second.
CEC Function
Supports CEC and CEC standby functions, and can be enabled/disabled through RS232 commands or
OSD menu. If the HDMI source device supports CEC and its CEC is on, and when the DXP-62 enter in
standby/startup mode, then the source device will automatically enter in standby/startup mode.
And due to CEC function, user can control HDMI source device with basic operations (play, pause, fast
forward, fast reverse, menu etc). So user is able to control the DXP-62 and HDMI source device via the
IR remote of the DXP-62.
Serial commands for CEC function:
“
!CEC1<cr>
” (enable CEC) and “
!CEC0<cr>
” (disable CEC).
The working status related to CEC and STANDBY is showed as below:
Situation Working Status
CEC: on,
Standby:
on
Press STANDBY button on IR remote, the DXP-62 enters in standby mode, so
do all HDMI source devices. Press STANDBY button again on IR remote, the
DXP-62 exits standby mode, only the HDMI source device switched to starts
working.
CEC: on,
Standby:
off
Press STANDBY button on IR remote, DXP-62 enters in standby mode, HDMI
1~3 source devices keep on.
CEC: on
Use CEC function buttons,

,

,

,

and
OK buttons on IR remote to control
HDMI source devices, include play, pause, fast forward, fast reverse and
operations in menu.
CEC: off Unable to control HDMI source devices through IR remote