Aurora DXP-62, Руководство пользователя

Страница: 12 / 36

9
User Guide
OPERATION
Buttons
The buttons can be used for output resolution adjusting, switching operations, software updating,
volume adjusting and operations in menus.
Resolution Switching
Supports auto-adjusting and manual-adjusting. Press and hold on SOURCE button for 7 seconds or
more to enter in auto-adjusting/manual-adjusting mode.
Note:
1. In auto-adjusting mode, DXP-62 will choose the resolution of the display device at the far-end as the
preferred resolution.
If need to choose the resolution of local HDMI display device:
 Cut off the power of DXP-62 and break the connection between DXP-62 and
DXE-CAT-RX1
.
 Turn on the power of DXP-62.
 Gets the resolution of local HDMI output device.
 Connect DXE-CAT-RX1 to DXP-62.
2. In auto-switching mode, front panel button control is not available, but IR and RS232 control is able
to switch modes.
Supports auto-switching and manual-switching. Press and hold on SOURCE button for 7 seconds or
more to enter in auto-switching/manual-switching mode.
The display result is showed as below:
The display result will be showed for 2 seconds
IN: HDMI1
MANUAL
1280 X 720
IN: HDMI1 AUTO
1280 X 720