background image

AU 

3360

Hot hair brash

ENG

10

WORK

Unwind the power cord.
Place the brush head on the drive, press the lock 

button on the nozzle.
Connect the equipment into an electrical outlet.
Divide the hair into locks.
With the switch to the desired mode of operation dryer:
 

“0” - hair off;

 

“C” - supply of “cold” air;

 

“1” - low temperature and low air flow rate;

 

“2” - high temperatures and high air flow rate.

ROTATING BRUSH 

To prepare the strand and carefully comb it , start 

to smooth it from the roots , walking up to her 

brush once or twice . The device shall operate in 

hot mode, but the brush does not rotate.
Raise the strand at right angles with respect to 

the surface of the head so as to not confuse the 

following are hair. Move the rotary brush sliding 

movement on strands, giving strands clocked 

her. Repeat this several times, moving the brush 

from roots to ends. Complete the operation by 

screwing on the strand brush, starting from the 

tips of the hair towards the roots. Wait a few sec-

onds, without changing the position to lock well 

warmed up and took the form, and lifted the hair 

at the roots. Depending on your hair type, if nec-

essary, you can repeat the operation. Use cold 

air at the end to lock as long as possible give it 

a shape. To do this, set the switch to “C” cold air, 

without rotation of the brush. To lay out the tips 

of the hair, place the brush on the tips of the hair 

over a lock and turn auto rotation brush outward. 

To put the tips of the hair inside, place the brush 

on the tips of the hair under the strand, and turn 

on auto rotation brush inwards.
If you remove the brush from the hair difficult 

to disconnect hairdryer, set the work in the «0», 

press the release button and remove the brush 

attachment with a hair dryer. Carefully remove it 

from the lock of hair.

HEAD-DIFFUSERS

Gives hair extra volume. Recommended for dry 

frizzy hair.

PADDLE FOR DIRECT HAIR

It is used to straighten hair.

NOZZLE FOR STYLING

Used to create smaller curls.

CARE AND CLEANING

Before cleaning, unplug the appliance and let it cool completely.
Regularly clean the brush head of hair.
Wipe the outside with a damp cloth dryer.
Do not use abrasive cleaners.

Отзывы: