Aurora AU 3360, Руководство пользователя

Страница: 9 / 12

AU
3360
Hot hair brash
ENG
9
Carefully read the owner’s manual.
Use this product only for its intended use as de-
scribed in the manual.
Before the first connecting, check that the techni-
cal characteristics of the product specified on the
label, the voltage supply.
Used only for domestic purposes according to
the Operating Instructions. The device is not in-
tended for commercial use.
Do not use this product outdoors.
Always unplug this product from the power sup-
ply before cleaning or when not in use.
To avoid electric shock, do not immerse the appli-
ance in water or other liquids.
If this happens,
DO NOT TOUCH the appliance,
unplug it from the electrical outlet and contact a
service center for inspection.
To avoid burns, do not touch the heating elements.
Do not use this product in close proximity to the
bath, shower or swimming pool.
Do not spray the hair styling product during operation.
The product is not intended for use by persons
(including children) with reduced physical, sen-
sory or mental capabilities, or if they have no life
experience or knowledge, unless they are con-
trolled or not instructed on the use of appliance
by a person responsible for their safety.
Children must be under the control of the game
in order to avoid the product.
Do not leave the product unattended.
Do not use accessories not included with this product.
Do not carry the unit by the cord or loop for hanging.
Make sure that the airway openings do not end
up hair, dust or fluff.
Do not cover the inlet and outlet ducts – the en-
gine and Heating element may be damaged.
You can not use the unit with a damaged power
cord and/or plug. To avoid the danger of a dam-
aged power cord must be replaced at an autho-
rized service center.
Do not attempt to repair the unit, or replace
parts. When it detects a problem, contact your
nearest service center.
Keep the cord away from sharp edges and hot
surfaces.
If the product for some time exposed to tempera-
tures below 0ºC, before turning it should be kept
under ambient conditions for at least 2 hours.
CAUTION!
Avoid the hot surfaces of the product
with the face, neck and other parts of the body.
Be careful! Working surface remains hot for some
time after the product from the mains. Place the
product on a flat, stable, heat-resistant surface.
To avoid overheating, do not operate continu-
ously for more than 10 minutes and be sure to
take a break of at least 10 minutes.
Do not use this product if your hair is too loose.
Excessive use of the product at the maximum
temperature may damage the hair.
Do not use this product for laying of synthetic wigs.
SAFETY PRECAUTIONS
TIPS FOR USE
Before embarking on perms, you need to wash
your hair. For best results, use the air conditioner
for the hair. After washing, dry the hair.
To maintain healthy hair, use thermal protection
styling products.
Doing styling, handle all the hair strands evenly.
To save installations apply to every strand of hair
fixative few styling.