Aurora Archer IS1200, Инструкция по установке и эксплуатации

Страница: 14 / 63

13
Installers—Please Note
(A) LOG SETTINGS
Do not remove logs from heater unless absolutely necessary!! Logs have been preset and aligned for
correct performance * Only place cross logs in position as per instructions above.
Please note: Accurate placement of logs is critical for correct performance of heater. Please ensure the
rear log is hard up against the rear at the firebox at the base and at the top.
*Note: If logs have moved during transit, only place logs in the exact positions explained in these pages.
8
9
INSTALLATION INSTRUCTIONS
LOG SET PLACEMENT — IS1200
1
2
3
4
5
6
7
8
9
10
1) REAR LEFT LOG
2) LEFT CROSS OVER LOG
3) RIGHT CROSS OVER LOG
4) LEFT FRONT LOG
5) REAR RIGHT LOG
6) CENTRE FRONT LOG
7) RIGHT FRONT LOG
8) FAR LEFT CROSS OVER LOG
9) FAR RIGHT CROSS OVER LOG
CENTRE CROSS OVER LOG 10)