what is available in this area for learning. If a template was used then fields with predefined names that
can still be edited will appear otherwise you may choose a name for your Command (such as “
Play
” or
“
Eject
”). Use letters and numbers only, no spaces should be included in the name. This Command will
be associated with the device / File Name you specified in step 1. There is also a learn x commands
where x is the number of commands to be learned. This allows multiple entries of commands to be
entered before learning which in turn will speed the process.
Finally look for the IR Learner port located on the front of the WACI. Steadily aim your remote's IR
output 6” from the sensors and press the desired remote button you wish the WACI to learn. The IR LED
will glow slowly while the WACI is waiting for an IR signal, and turn solid when it detects a signal. If
the remote is too close the LED will glow fast. The web display will indicate a successfully learned
command or a timeout if nothing was received.
IR Learning Tips
•
Hold the remote steady.
•
Hold the remote about 6” from learner port.
•
Do not confuse the learner port with the emitter or IrDA ports.
•
Turn off fluorescent lights.
Managing Learned Commands
You may view all learned commands at the bottom of the page:
Serial Port Diagnostics
The serial port diagnostics are available for the NX-22. From this web page, you may access three
diagnostics for the serial ports.
Serial Send & Receive Histories
First, you may monitor the send and receive histories from either serial port.
