AHFL 433 A1
■
12
│
US - EN
The weather station will now attempt to connect to the outdoor
sensor . On the display field for outdoors
3
, the reception icon
above the channel display
blinks .
If no outside temperature or humidity is shown within approx.
3 minutes, the weather station stops searching for a signal. The
reception icon
turns off and the display field for outdoors
3
shows
and
. The system likely cannot detect a signal
due to structural conditions or because the sensor is too far
away.
If the device is unable to connect to the outdoor sensor automati-
cally, you can establish a connection manually:
♦
Press and hold the control surface
4
until the reception
icon
on the display field for outdoors
3
blinks .
♦
Press the
TX
button
z
to manually start the wireless signal
for the outdoor sensor .
IB_291952_AHFL433A1_WeatherStation_LB9.indb 12
08.05.18 13:29
