AHFL 433 A1
US - EN
│
17
■
Displaying the maximum/minimum tempera-
ture/humidity
After connection to the power supply and the outdoor sensor
has been established, the maximum and minimum values for
temperature and humidity are automatically captured and stored
by the weather station .
♦
In basic mode, press the control surface
6
once . In
both display fields (
3
and
7
), the
icon appears next
to the humidity and the highest measured value for both
inside and outside is shown .
♦
If you press the control surface
6
in basic mode, the
icon appears and the lowest measured value for both
inside and outside is shown .
♦
After about 5 seconds, the current values for inside and
outside are automatically shown once more .
♦
Press and hold the control surface
6
for about 3 seconds
to delete the stored values .
Switching between temperature units
Upon delivery, the temperature unit is set to degrees Fahrenheit
( ) by default .
♦
In basic mode, press the control surface
5
to switch
between temperature units ( or ) . The display switches
for both the inside and outside temperature .
♦
Press the
°C/°F
button
u
to change the temperature unit
on the outdoor sensor display
e
.
IB_291952_AHFL433A1_WeatherStation_LB9.indb 17
08.05.18 13:29
