- 7 -
Restarting radio control signal reception
Radio control signal reception can be restarted by pressing and holding the
MEM-
-
button
17
for 3 seconds. The radio control symbol
10
will blink on the display. The
radio-controlled weather station will now start the DCF77 signal reception attempt. This
process can take from 3-10 minutes.
Light
Press the
SNOOZE/LIGHT
button
7
to briefly activate the backlight.
12/24 hour time format
Press and hold the
°C/°F-SET
-button
18
1x long and 3 x briefly in normal time display
mode. The 12- or 24-hour time format will blink and can be set by pressing the
MEM-
-button
17
or the
CH-
-button
16
. In 12-hour mode the display will show AM before
noon and PM after noon.
Temperature
Press the
°C/°F-SET-
button
18
to show the temperature unit degrees Celsius (°C) or
degrees Fahrenheit (°F).
Indoor / outdoor temperature
Speed setting
Press and hold the
MEM-
-button
17
and the
CH-
-
button
16
to use the speed
setting feature when setting numerical values.
Basic settings
The following basic settings are possible: Hours, minutes, time zone and 12/24 hour
time format. Press and hold the
°C/°F-SET
-button
18
in normal time display mode for 3
seconds. The hours
will blink and can be set by pressing the
MEM-
-button
17 or the
CH-
-button
16.
Press the
°C/°F-SET
-button
18
to confirm your setting. Set the
minutes, time zone 00-(-) and 12/24 hour time format in the same way.
Setting the alarm time
Press the
ON/OFF-ALARM
-button
19
1x briefly while in normal time display mode to
enter alarm mode.
OFF
and AL will appear on the display. Press and hold the
ON/OFF-
ALARM
-button
19.
The hours will blink and can be set by pressing the
MEM-
-button
17
or the
CH-
-
button
16
. Press the
ON/OFF-ALARM
-button
19
to confirm your
setting. The minutes will blink and can be set in the same way. Press the
ON/OFF-
ALARM
-button
19
to confirm your setting and return to normal time display mode.
Activating and deactivating the alarm
Press the
ON/OFF-ALARM
-button
19
1x briefly in normal time display mode to enter
alarm mode.
OFF
and AL will appear on the display.
Press the
MEM-
-button
17
or the
CH-
-button
16
. The set alarm time and the alarm
symbol
5
will appear on the display. The alarm is now activated. Press the
MEM-
-
button
17
or the
CH-
-
button
16
again. OFF will appear on the display and the alarm
symbol
5
will disappear. The alarm is now deactivated.
Press the ON/OFF-ALARM
-button
19
2 x briefly to return to normal time display mode.
Snooze (SNOOZE)
Press the
SNOOZE/LIGHT
-button
7
when the alarm sounds to temporarily deactivate
the alarm.
Z
Z
will blink on the display. After 5 minutes, the alarm will sound once again.
Press any button other than the
SNOOZE/LIGHT
-button
7
to turn the alarm off.
