- 9 -
Ventilation recommendation
The radio-controlled weather station calculates the expected change in room climate
from the measured indoor and outdoor values and will either recommend ventilation or
not.
Open window
No window change
Close window
Room climate changes
Room climate stays the
same
Room climate changes
Setting the mould alert
Press the
ON/OFF-ALARM
-button
19
in normal time display mode to
enter mould alert mode. OFF will appear on the display. Press and
hold the
ON/OFF-ALARM
-button
19
. The pre-set mould alert value of 65 % humidity
will blink. The value can be changed in 5 % increments by pressing the
MEM-
-button
17
or the
CH-
-button 16
. Press the
ON/OFF-ALARM
-button
19
to confirm your
setting and return to normal time display mode.
Activating and deactivating the mould alert
Press the
ON/OFF-ALARM
-button
19
2 x briefly in normal time display mode to enter
mould alert mode. OFF will appear on the display.
Press the
MEM-
-button
17
or the
CH-
-button
16
. The set humidity value and the
mould alert icon
4 will appear on the display. The mould alert is now activated.
Press the
MEM
- -button
17
or the
CH
- -button
16
again. OFF will appear on the
display and the mould alert icon
4
will disappear. The mould alert is now
deactivated.
Press the
ON/OFF-ALARM
-button
19 to
return to normal time display mode.
Maximum and minimum values
The radio-controlled weather station will start to record the maximum and minimum
values for temperature and humidity when the batteries are inserted.
Press the
MEM-
-button
17
1 x briefly to show the maximum
MAX
indoor
temperature
1
, outdoor temperature
15
, indoor humidity
3
and outdoor temperature
14
on the display.
Press the
MEM-
-button
17
again 1 x briefly to show minimum
MIN
indoor
temperature
1
, outdoor temperature
15
, indoor humidity
3
and outdoor temperature
14
on the display. To delete the stored maximum and minimum values, press 1x briefly and
1x long the
MEM-
-button
17
. The stored maximum and minimum values are deleted
and new values will be recorded.
Battery low indicator
If the batteries are to weak to power the radio-controlled weather station, the radio
outdoor sensor and the signal transmission, the battery low indicator
9
or
13
will appear
on the display
. The batteries must be replaced as soon as possible in all devices.
Restart the radio-controlled weather station.
Restart (RESET)
Press the
RESET
-button
26
to reset the radio-controlled weather station and restart radio
signal reception.
Cleaning instructions
Improper cleaning can damage the device. Do not submerge the device in water or
other liquids. Do not use aggressive cleaners, brushes with metal or nylon bristles, or
sharp or metallic cleaning tools such as knives, scrapers or similar implements. These may
