- 5 -
27
Stand
28
Temperature
29
Humidity
30
Set channel
31
Operation-LED
32
°C/°F-button
33
TX-button
34
Hole for wall mounting
35
Channel selection switch
36
Battery compartment
Securely placing or mounting the weather station
The weather station with radio outdoor sensor is not designed for operation in rooms with
high humidity (i. e. bathroom). Use the included screws and anchors for wall mounting.
Make sure that:
sufficient ventilation is always guaranteed (don’t place the device on shelves or where
curtains or furniture block the ventilation slots
22
, and ensure that there are at least 10
cm of space on all sides);
the device isn’t placed on a thick carpet or bed during operation, no direct heat
sources (i.e. radiators) influence the device;
no direct sunlight reaches the device;
contact with splashing or dripping water must be avoided (don’t place any items filled
with liquids, i.e. vases, onto or next to the device);
the device doesn’t stand near magnetic fields (i.e. speakers);
no foreign objects or dust penetrate the housing;
candles and other open flames must be kept away from this product at all times to
prevent the spread of fire.
Securely placing or mounting the radio outdoor sensor
Place the sensor in a location where it is protected from the weather, for example under
an awning or carport. The sensor has an IPX4 rating and is therefore protected from
water splashes. Use the included screws and anchors for wall mounting. Make sure that:
the sensor hangs or stands upright;
sufficient ventilation is always guaranteed (don’t place the device on shelves or where
curtains or furniture block the ventilation holes, and ensure that there are at least 10 cm
of space on all sides);
no direct sunlight reaches the device;
the device doesn’t stand near magnetic fields (i.e. speakers);
no foreign objects or dust penetrate the housing;
sensitive surfaces are protected before placement.
Setup
Open the battery compartment of the radio outdoor sensor
36
and insert the included
batteries in
the correct polarity
.
The operation LED
31
lights up briefly and the temperature is displayed.
Close the battery compartment.
Open the battery compartment of the radio-controlled weather station
23
and insert the
included batteries in the
correct polarity
. Close the battery compartment.
The display will turn on for 5 seconds and a tone will sound. The radio-
controlled weather station will measure the indoor temperature and indoor humidity.
Then the radio-controlled weather station will begin to receive the temperature and
humidity from the radio outdoor sensor. The radio waves
12
will blink. The process
can take up to 3 minutes. If radio signal reception is not possible, the radio-controlled
weather station will abort the process. The radio-controlled weather station now starts
reception of the DCF77 radio control signal. The radio control symbol
10
will blink on
the display. This process can take from 3 to 10 minutes. During the reception process, all
Insert the batteries into the battery compartment of the radio
outdoor sensor 36 and only then insert batteries into the
battery compartment of the radio-controlled weather
station 23.
