AURATON T-1 RT, Руководство пользователя

Страница: 7 / 16

7
Selecting the proper location
for temperature regulator
Fastening the temperature regulator to the wall
NOTE: Before installing the appliance to the wall, it needs to be paired with a previously
connected receiver.
A controller T-1 and a receiver purchased together, do not require pairing. The appliances
have been already pre-paired.
Proper operation of the regu -
lator is greatly affected by its
location. Installing it in a place
with no air circulation or ex -
posed to direct sunlight causes
improper regulation of temper -
ature. In order to ensure proper
operation, the regulator must
be installed on an interior wall
of a building (partition wall). A
place should be selected that is
occupied most frequently, pro -
viding undisturbed circulation
of air. Avoid heat radiating devices (television set, heater, refrigerator etc.) or places
exposed to direct sunlight. In order to avoid vibration, do not place the regulator in close
vicinity of doors.
1.
Drill two 5 mm holes in the wall (select
the span of holes with a wall-mounted
holder-enclosed to the set with con -
troller AURATON T-1
2. Insert the wall anchors to the holes
(attached to a set).
3. Fix the mounting plate to the wall.
4. Press to join the regulator tightly
against the mounting holder(the holes
on a back part of the unit should be
suitable for snap-on of the holder).
Note: If the wall is made of wood, there is no need to use the wall anchors. Drill 2,7mm
holes in the wall instead of 5mm and screw the screws directly in a wood.