AURATON 2030, Руководство пользователя

Страница: 12 / 32

12
2 . On the AURATON 2030 RTH regulator, press the button and hold it for
5 seconds until the transmission symbol ( ) appears on the display. Release
the button - the regulator transmits the pairing signal for 5 seconds.
radio
– Monday Saturday
– Tuesday – Sunday
– Wednesday
– Thursday
– Friday
–
After the proper placement of batteries in
the battery holder, all segments of the LCD
display are displayed (display test) for one
second and after that, the software version
number is displayed.
Following that, the regulator automatically
enters the time setting mode; the hour
field flashes, prompting for setting it.
Using the ‚
and buttons, set the
desired hour value and confirm the setting
with the
button.
Using the‚ buttons, set the desired
minute value and confirm the setting with
the
button.
In the upper part of the display, the day of
week symbol starts flashing. Using the‚
buttons, set the desired day of week
and confirm the setting with the
button
[up] [do]
[OKOK]
[updon]
[OKOK]
[updo]
[OKOK]
Starting-up the regulator for the first time
13
NOTE :
1) If no button is pressed in 60 seconds when setting the hour value for the
first time, the regulator will automatically assume default time of 12:00
and Monday ( ) as the day of week.
2) When programming any other functions, failing to press any button in 10
seconds is equivalent to pressing the button . [OKO]
3 . A properly completed deregistering process is signalled by the LED on the
AURATON RTH receiver no longer flashing red and the receiver reverting back
to normal operation.
In the event of an error during the deregistering process, repeat steps 1 and 2.
Should more errors occur, deregister all paired devices (see “RESET - Deregistering
all devices paired with the RTH receiver”) and attempt to pair the device again
.
RESET - Deregistering all devices paired
with the RTH receiver
In order to deregister all devices paired with
the RTH receiver, simultaneously press both
the pairing and the deregistering button
(
and ) and hold them for at least
5 seconds until the LED flashes alternating
red and green. Then release both buttons.
A properly completed process of
deregistering all devices is signalled after
approx. 2 seconds by the LED colour
changing to green and then switching it off
for a short period of time.
.. ..
Signalling operation and reception
of data packet
Each radio transmission received by the AURATON RTH receiver from the paired
device is signalled by a temporary change of LED colour to orange. Switching on
the relay is signalled by the LED lit red, whereas switching it off is signalled by the
LED lit green.
LED
NOTE : If after executing the RESET function the RTH receiver is disconnected
from power supply and then connected again, the receiver will automatically
enter “pairing” mode for 120 seconds. A newly purchased RTH receiver without
any factory-paired devices (i.e. not the one bundled with the regulator) will
behave the same way.