Auralic ALTAIR, Руководство пользователя

Страница: 9 / 23

9
NEVER SHORT ANY OUTPUT OF ALTAIR TO GROUND!
FAILED TO DO THAT WILL DAMANGE THE UNIT
PERMANENTLY AND WILL VOID FACTORY WARRANTY!
l WiFi, Ethernet for Lightning Streaming
The Lightning Streaming can be activated through Wi-Fi or Ethernet connection.
Please refer to page 14 for detailed instruction on how to setup ALTAIR in your home
network.
l USB Storage Input
The USB storage port can deliver 5V/500mA current to power USB drive. We suggest
you to use self-powered USB drive for better sound quality consideration. To play mu-
sic stored on the USB drive, you need to connect ALTAIR to your home network first,
please refer to page 14 for instruction.
l USB DAC Output
When using ALTAIR as a Lightning streamer, you may connect ALTAIR to a USB DAC,
making it as a digital streamer only. To use this function, you will need to connect
ALTAIR to your home network first, please refer to page 14 for instruction.
l AES/EBU, Coaxial and Toslink Digital Inputs
The AES/EBU, Coaxial and Toslink digital inputs are individually buffered. Maximum
sampling rate supported by these ports is 24 Bit / 192 KHz.
l USB 2.0 High Speed Input
The USB 2.0 Input uses asynchronous transmission mode and is buffered by AURAL-
iC's ActiveUSB technology to further reduce jitter effects. The USB input supports
PCM signals up to 32 Bit / 384KHz, DSD streams at 2.8224 MHz and 5.6448 MHz
through DoP V1.1 protocol and DSD256 through Native DSD on Windows PC with
selected compatible playback software or through other Linux based streamer. The
specific driver is required for proper functioning under Windows PC system, please
refer to ‘To use ALTAIR as standalone USB DAC’ on page 15.
l Main Power Inlet Socket
We suggest you to use standalone power supply for the ALTAIR to provide isolation
from other digital source components using switching power supply. The power con-
sumption of ALTAIR is less than 30W, so a heavy gauge power cord is not recom-
mended as the weight of the power cord connector may damage the power cord
socket on the back of the unit. Please double check the AC mains voltage on the back
of the unit before connecting to the power.