Auralic ALTAIR, Руководство пользователя

Страница: 20 / 23

20
Troubleshooting
No Power
l Make sure the power cord is connected to both the AC mains connector and an AC
wall outlet.
l Try to change for another power cord.
l Check the AC mains voltage indication on the back of the unit and see if it corresponds
to your local power voltage.
No Sound or Low Output
l Examine all cables to ensure a solid connection between the ALTAIR and associated
components.
l If you are using the USB port, make sure the playback software’s volume is set to an
audible level and not muted.
l Make sure all associated components are powered on.
l Make sure the associated components connected to the selected input has an audible
output signal.
l Try rebooting the ALTAIR (power off the ALTAIR, then power on again).
Distorted or Partial Sound
l Check the output cables between the ALTAIR and the preamplifiers / power amplifiers
/ active loudspeakers, make sure all are well connected.
l Make sure that all speaker connections are tight and that no stray strands of wire
shorting exist within the speaker terminals.
l Try rebooting the ALTAIR (power off the ALTAIR, then power on again).
Noise / Hum
l Check the output cables between the ALTAIR and associated components, make sure
all connections are well done.
l Make sure the output cables between the ALTAIR and the power amplifiers are not
settled near any AC cables, power transformers, or other EMI inducing devices.
l It may be helpful to plug all associated components into the same AC circuit in order
to share a common ground.