Auralic ALTAIR, Руководство пользователя

Страница: 17 / 23

17
music.
2. DYNAMIC
DYNAMIC exhibits a gentler roll-off curve of frequencies; it maintains great in-
band, stop-band performance while trades off small attenuation at treble. DY-
NAMIC is best for the playback of light jazz, chamber music and piano solo.
3. BALANCE
BALANCE is designed to minimize the 'pre-ringing' and 'echo' effects. As a result,
this mode sounds very smooth. However, due to the slow roll-off at high frequency,
it may lose some details in treble for certain kinds of music. BALANCE is best for
vocal, jazz and pop music.
4. SMOOTH
All filters in this mode are designed to optimize the subjective listening experience
at maximum. By using minimum phase design, there is no 'pre-ringing' effect in
this mode, the 'echo' effect is also been reduced as much as possible SMOOTH
is the 'all-best' option for music enjoyment.
5. BACK
Back to previous menu.
5. SYSTEM
1. VOL.MOD
1. MASTER
All input channels will use same volume setting. Default volume at first use is
20 (-40dB).
2. INDVDL (default)
Each input channel has its own volume setting. When you switch to new input
channel, ALTAIR will fade in slowly to avoid sudden loud sound. Default volume
for every input channel is 20(-40dB).
3. BACK
Back to previous menu.
2. DISPLAY
1. KEEP ON (default)
Display will keep on till manually switch off by remote control. Display will light
again by any button on the remote control or the rotary switch.
2. AUTO OFF
The display switches off automatically after 15 seconds without any operation.
And it will light again by any button on the remote control or the rotary switch.
3. DIM
Set display brightness to low.
4. NORMAL (default)
Set display brightness to middle.