AUO PS42A, Руководство пользователя

Страница: 65 / 74

Controlling the Display Remotely | 63
Signal Check
Priority 14 g 4B Input value: Byte1 - Byte2 -
Byte3…Byte9, value don't care
Return value: Byte1 - Byte2 -
Byte3…Byte9
(1) Byte1 to Byte4: value can be
0x0: VGA,
0x1: HDMI,
0x5: DVI1,
0x6: DVI2,
If input source does not set,
return 0xFF
Byte1: Priority1 input signal
Byte2: Priority2 input signal
Byte3: Priority3 input signal
Byte4: Priority4 input signal
(2) Byte5~9 are reserved,
should be 0x00.
100
Network Setting 14 g DD Input Value: Byte1 - Byte2 -
Byte3…Byte9
(1) Byte1=0x00: IP Setup Mode
Byte1=0x01: IP Address
Byte1=0x02: Get Subnet
Mask
Byte1=0x03: Default
Gateway
Byte1=0x04: Primary DNS
Byte1=0x05: Secondary
DNS
Byte1=0x06: MAC Address
(2) Byte2~9 are reserved,
should be 0x00.
Return value: Byte1 - Byte2 -
Byte3…Byte9
The Byte1 at the return value
should be the same as the value
of Byte1 at Input value.
Byte2~Byte15 should be hex
value format
(1) If Byte1=0x00(IP Setup
Mode) at Input value, the
return value should be
Byte1=0x00
Byte2=0x00: Manual
0x01: DHCP
Byte3~9 are reserved,
should be 0x00.
100 Ex:
Subnet Mask=
255.255.255.0, the
return value:
Byte1=0x02,
Byte2=0xFF,
Byte3=0xFF,
Byte4=0xFF,
Byte5=0x00,
Byte6~9=0x00.
OSD
mode
Get Function Len ID Cmd
Type
Cmd
Code
(Hex)
Value Range (ASCII Bytes) Wait
response
time (ms)
Remark