AUO PS42A, Руководство пользователя

Страница: 24 / 74

22 | Preparing Your Display for Use
Adjustment
1. Turn the main power switch ON.
2. Turn ON the main power of this equipment and the computer or the video equipment.
3. Adjust the screen.
For a longer service life
The backlight used for the display has its lifetime, and the brightness of the backlight decreases
with the time of use.
Moreover, when an image is shown for a long time, the “residual image” phenomenon may occur,
in which the previous screen image remains when changing the screen display.
The residual image gradually fades by changing screen images, but if the same screen is
displayed for too long, the residual image will not disappear.
For a longer service life of this equipment, please take precautions to the following.
• Please turn OFF the main power when the equipment is not in use.
• Use the power button of the main unit or remote control to turn the power OFF.
• Please set the power save function to “30 ~ 300 Sec” It automatically switches to power
saving mode when no signal is input. The factory default is set to “300 Sec”.
• Use the scheduler function to turn the power ON / OFF automatically according to the
specified time.
NOTE
• Be sure to set the date / time when using the scheduler function.
• Use the burn-in prevention function in order to reduce the burden on the LCD.