AUO PS42A, Руководство пользователя

Страница: 28 / 74

26 | Functions
Changing aspects
You can change the aspect ratio of the screen by pushing the ASPECT button on the remote
control or by setting up in the OSD main menu.
Main Menu > Picture > Aspect Ratio .
Screen distortion occurs if you try to use an image aspect different from the original signal
Mode
Original signals
Comments
16:9 4:3
Full
Change the aspect ratio to
fill the whole screen.
Zoom
Enlarge or reduce the
resolution of the image
vertically or horizontally in
any ratio.
(it can be enlarged/reduced
0.9 times to 3 times
vertically or horizontally)
The display position of the
image can be adjusted by
H. Position and V. Position
for horizontal and vertical
adjustment, respectively.
Normal
Display the image that fills
the height of the screen
without changing its aspect
ratio.
1920 x 1080,
1920 x 960
Other timing
TRIM_UP
Display the image that fills
the width of the screen
without changing its aspect
ratio, cutting out 480 dots
from the top of the image. It
support only for timing of
1920x1080 and 1920x960.
TRIM_DOWN
Display the image that fills
the width of the screen
without changing its aspect
ratio, cutting out 480 dots
from the bottom of the
image. It support only for
timing of 1920x1080 and
1920x960.
NOTE
• Please be aware that using the screen images compressed and enlarged by changing the
image aspect, for purpose of commercial profit or viewing by the public at coffee shops or
hotels, etc., may infringe upon the rights of the copyright holder protected under copyright
law.