Aumuller Lift-Smoke-Free LSF 7000, Инструкции по установке, эксплуатации и техническому обслуживанию

Страница: 4 / 56

4
RWA Control Unit LSF 7000
P
reliminary
r
emarks
i
ntended
u
se
Despite the greatest possible care, no li-
ability can be accepted for the content of
this publication. All information given is
not to be considered as assured proper-
ties according to §434 BGB.
We recommend exclusively using compo-
nents from
a
umüLLer
as their compati-
bility is carefully checked at the factory
and they are covered by the abZ.
a
umüLLer
accepts no responsibility
for the system compatible operation of
third party external components. The use
of applications and components other
than those explicitly stated in these ins-
tructions require express written consent
from
a
umüLLer
. The use of applications
and components not specifically authori-
sed by
a
umüLLer
are also considered
non-compliant, even if their proper fun-
ctioning can be verified during commissi-
oning (e.g. by acceptance under building
law).
The installer of the
L
iFt
-S
moke
-F
ree
or
smoke exhaustion from lift shafts must
hand over these instructions to the end
user after installation and commissio-
ning. The end user must keep these in-
structions in a safe place and use them
when necessary.
n
ote
n
ote
!
W
Arning
Area of Application / Scope of Application
The
L
iFt
-S
moke
-F
ree
elevator shaft smoke exhaustion
system is used for the exhaustion of smoke from elevator
shafts inside buildings and for ventilation. The main task of
the system and its components is the removal of hot smoke
and fumes in the event of a fire, therefore saving human
lives and protecting the property. Furthermore, the system
can be used for ventilation purposes in the elevator shaft.
As the manufacturer, we are fully aware of our duty and
responsibility regarding the development, production and
marketing of safety-related systems and consistently imple-
ment them. Ultimately, however, we have no direct influen-
ce on the usage of our products. We therefore point to the
following as a precaution:
• For the manufacture and use of the
L
iFt
-S
moke
-F
ree
elevator shaft exhaustion system with the VdS approved
Control Unit
LSF 7000
,
a
umüLLer
has a certificate of
suitability under building law in the form of a combined
“general building supervision approval” (abZ), issued by
the German Institute for Building Technology (DIBt).
• Only components and functions that are covered by the
combined abZ may be used in the assembly and configu-
ration of the system.
01
These instructions are intended for qualified electricians and
skilled operators of systems for natural smoke ventilation
(NRA / RWA) systems and natural ventilation via windows,
who are knowledgeable of operating modes and remaining
risks of the system.
t
Arget
g
roup
This system is not intended for use by
persons (including children) with limited
physical, sensory or mental abilities, or
lack of experience and/or knowledge.
!
W
Arning
• The installer of the L
iFt
-S
moke
-F
ree
elevator shaft
smoke exhaustion system must issue an installation
certificate and a declaration of conformity of the system
with the requirements of the abZ.
• If functions of the L
iFt
-S
moke
-F
ree
elevator shaft
smoke exhaustion system are connected to the Control
Unit of the elevator, a function test of the lift system must
be carried out and documented by a qualified person in
accordance with the Ordinance on Industrial Health and
Safety.