AUMA SQEx 05.2 страница 12 Скачать руководство пользователя | Manualshive

Страница: 12 / 92

background image

Figure 7: Link to AUMA Assistant App:

For further Service & Support, software/apps/... refer to www.auma.com.

2.2.

Short description

Part-turn actuator

Definition in compliance with EN 15714-2/EN ISO 5211:

A part-turn actuator is an actuator which transmits a torque to the valve for less than
one full revolution. It need not be capable of withstanding thrust.

AUMA part-turn actuators SQEx 05.2 – SQEx 14.2/SQREx 05.2 – SQREx 14.2 are
driven by an electric motor. For manual operation, a handwheel is provided. Switching
off in end positions may be either by limit or torque seating. Actuator controls are
required to operate or process the actuator signals.

Actuator controls

ACExC 01.2 actuator controls are used to operate AUMA actuators and are supplied
ready for use. The actuator controls may be mounted directly to the actuator or
separately on a wall bracket.

The functions of the ACExC 01.2 actuator controls include standard valve control in
OPEN-CLOSE duty, positioning, process control, logging of operating data, diagnostic
functions right through control via various interfaces (e.g. Fieldbus, Ethernet and
HART).

Local controls/

AUMA software

Operation, setting, and display can be either performed directly at actuator controls
or alternatively from Remote via binary input signals, or using another interface.

The following options are available at the actuator controls in local operation:

●

The actuator can be operated via the push buttons of the local controls or set-
tings can be made in the actuator controls menu. The display shows information
on the actuator as well as menu settings (contents of these instructions).

●

Using the AUMA CDT software for Windows-based notebooks or the AUMA
Assistant App for Android-based devices, data can be uploaded and read
whereas settings can be modified and stored.The connection between computer
and actuator controls is wireless via Bluetooth interface (not included in these
instructions). AUMA CDT software can be downloaded free of charge from our
website www.auma.com.

Intrusive - Non-Intrusive

●

Intrusive version (control unit: electromechanical):
Limit and torque setting is performed via switches in the actuator.

●

Non-Intrusive version (control unit: electronic):
Limit and torque setting is performed via the controls, without removal of actu-
ator or actuator controls covers. For this purpose, the actuator is equipped with
an MWG (magnetic limit and torque transmitter), also capable to supply analogue
torque feedback signals/torque indication and analogue position feedback sig-
nals/position indication at the actuator controls output.

12

SQEx 05.2 – SQEx 14.2 / SQREx 05.2 – SQREx 14.2 Control unit: electronic (MWG)

Identification

ACExC 01.2 Non-Intrusive Modbus TCP/IP

«
...
10
11
12
13
14
...
»

Содержание SQEx 05.2





























































































Отзывы:

Нет отзывов

Похожие инструкции для SQEx 05.2

Бренд: Nelsen Corporation Страницы: 16

Бренд: National Instruments Страницы: 34

ClubSport Wheel Base V2

Бренд: FANATEC Страницы: 39

Бренд: Ransburg Страницы: 49

Бренд: Balboa Страницы: 2

Бренд: Badger Meter Страницы: 20

Бренд: NEC Страницы: 304

Бренд: Ohsung Electronics Страницы: 18

Бренд: MacDon Страницы: 32

Бренд: K&K Страницы: 6

Бренд: Taoglas Страницы: 2

Бренд: Dantel Страницы: 6

GAMMA VERSUS Series

Бренд: JCM Страницы: 111

767-4804/000-800

Бренд: WAGO Страницы: 80

Temp Alert TA2HL

Бренд: Winland Electronics Страницы: 2

SmarTemp Control fx

Бренд: Webasto Страницы: 8

Бренд: FOR-A Страницы: 6

Бренд: turck Страницы: 45

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды