AUMA SAE 07.2 Series Скачать руководство пользователя страница 98 | Manualshive

Страница: 98 / 116

AUMA SAE 07.2 Series Скачать руководство пользователя страница 98

Features and functions

●

2 free analogue inputs (0/4 – 20 mA), 4 free digital inputs

-

Signal transmission is made via fieldbus interface

●

Inputs OPEN, STOP, CLOSE, EMERGENCY, I/O interface, MODE (via opto-isolator thereof OPEN,
STOP, CLOSE, MODE with one common and EMERGENCY, I/O interface respectively without
common)

-

OPEN, STOP, CLOSE, EMERGENCY control inputs

-

I/O interface: Selection of control type (Fieldbus interface or additional input signals)

-

MODE: Selection between open-close duty (OPEN, STOP, CLOSE) or modulating duty (0/4 –
20 mA position setpoint)

-

Additionally 1 analogue input (0/4 – 20 mA) for position setpoint

●

Inputs OPEN, STOP, CLOSE, EMERGENCY, I/O interface, MODE (via opto-isolator thereof OPEN,
STOP, CLOSE, MODE with one common and EMERGENCY, I/O interface respectively without
common)

-

OPEN, STOP, CLOSE, EMERGENCY control inputs

-

I/O interface: Selection of control type (Fieldbus interface or additional input signals)

-

MODE: Selection between open-close duty (OPEN, STOP, CLOSE) or modulating duty (0/4 –
20 mA position setpoint)

-

Additionally 1 analogue input (0/4 – 20 mA) for setpoint position and 1 analogue input (0/4 – 20
mA) for actual process value

Fieldbus interface with additional
input signals (option)

24 V DC, current consumption: approx. 10 mA per input

Standard:

Control voltage/current consumption
for control inputs

48 V DC, current consumption: approx. 7 mA per input
60 V DC, current consumption: approx. 9 mA per input
100 – 125 V DC, current consumption : approx. 15 mA per input
100 – 120 V AC, current consumption : approx. 15 mA per input

Options:

Via Modbus RTU interface

Status signals

Additional, binary output signals (only available in combination with additional input signals (option)

●

6 programmable output contacts:

-

5 potential-free NO contacts with one common, max. 250 V AC, 1 A (resistive load)
Standard assignment: End position CLOSED, end position OPEN, selector switch REMOTE,
torque fault CLOSE, torque fault OPEN

-

1 potential-free change-over contact, max. 250 V AC, 5 A (resistive load)
Standard assignment: Collective fault signal (torque fault, phase failure, motor protection tripped)

●

6 programmable output contacts:

-

5 potential-free change-over contacts with one common, max. 250 V AC, 1 A (resistive load)

-

1 potential-free change-over contact, max. 250 V AC, 5 A (resistive load)

●

6 programmable output contacts:

-

6 potential-free change-over contacts without one common, max. 250 V AC, 5 A (resistive load)

●

6 programmable output contacts:

-

4 mains failure proof potential-free NO contacts with one common, max. 250 V AC, 1 A (resistive
load), 1 potential-free NO contact, max. 250 V AC, 1 A (resistive load), 1 potential-free change-
over contact, max. 250 V AC, 5 A (resistive load)

●

6 programmable output contacts:

-

4 mains failure proof potential-free NO contacts, max. 250 V AC, 5 A (resistive load), 2 potential-
free change-over contacts, max. 250 V AC, 5 A (resistive load),

●

Analogue output signal for position feedback

-

Galvanically isolated position feedback 0/4 – 20 mA (load max. 500

Ω

)

Fieldbus interface with additional
output signals (option)

Auxiliary voltage 24 V DC: max. 100 mA for supply of control inputs, galvanically isolated
from internal voltage supply.

Standard:

Voltage output

Auxiliary voltage 115 V AC: max. 30 mA for supply of control inputs, galvanically isolated
from internal voltage supply
(Not possible in combination with PTC tripping device)

Option:

Redundant line topology with universal redundancy behaviour according to AUMA redundancy I or II
Redundant loop topology in combination with SIMA Master Station

●

Max. number of actuators equipped with controls per redundant loop: 247 units.

●

Max. possible cable length between the actuators equipped with controls without external repeater:
1,200 m

●

Max. possible total length per redundant loop: approx. 290 km

●

Automatic commissioning of the redundant loop by means of the SIMA Master Station

Redundancy (option)

98

SAEx 07.2 – SAEx 16.2/SAREx 07.2 – SAREx 16.2 Control unit - electromechanical

Technical data

ACExC 01.2 Intrusive Modbus RTU

«
...
96
97
98
99
100
...
»

Содержание SAE 07.2 Series





















































































































Отзывы:

Нет отзывов