AUMA SAE 07.2 Series Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 116

AUMA SAE 07.2 Series Скачать руководство пользователя страница 37

5.

Fit cover [1] and fasten screws [2] evenly crosswise.

For design in flameproof enclosure (Ex d):

Flameproof enclosure, danger of explosion!

Risk of death or serious injury.

→

Handle cover and housing parts with care.

→

Joint surfaces must not be damaged or soiled in any way.

→

Do not jam cover during fitting.

6.

Fasten cable glands and blanking plugs applying the specified torque to ensure
the required enclosure protection.

6.4.

KP/KPH electrical connection

Figure 37: KP and KPH electrical connection

[1]

Screw-type terminals

[2]

Plug-in frame (flameproof)

Short description

KP/KPH plug-in electrical connection with screw-type terminals for power and control
contacts.

KP version (standard) with three cable entries. KPH version (enlarged) with additional
cable entries. Cable entries via the cover.

The terminal compartment (with screw-type terminals) is designed in protection type
Ex e (increased safety). Plug-in connection is made via the frame. Removing the
cover is sufficient for connecting the cables. The flameproof frame remains connected
to the device. The flameproof interior of the connected device remains sealed.

37

SAEx 07.2 – SAEx 16.2/SAREx 07.2 – SAREx 16.2 Control unit - electromechanical
ACExC 01.2 Intrusive Modbus RTU

Electrical connection

«
...
35
36
37
38
39
...
»

Содержание SAE 07.2 Series





















































































































Отзывы:

Нет отзывов