AUMA PROFOX PF-100, Руководство по эксплуатации

Страница: 23 / 52

7.1.1. Set end position CLOSED
Electric shock due to presence of hazardous voltage!
Failure to observe this warning results in death or serious injury.
→
Electrical connection and commissioning must be carried out exclusively by
suitably qualified personnel if circuit is live.
→
Do not touch any cables.
1. Remove cover from actuator.
2. Operate in direction CLOSE via push button until complete valve closing.
Risk of passing set end positions!
→
During operation in directions OPEN/CLOSE, the actuator stops when reaching
the set end position. When pressing again the button, the actuator runs until
reaching a mechanical stop (end stop of the actuator or the valve) or passes
the end position when releasing the button.
➥ The operation in direction CLOSE is signalled by the LED flashing in red.
3. Once the desired end position CLOSED has been reached, release the push
button .
➥ The LED continues flashing in blue for approx. 10 seconds. This time span al-
lows for end position setting.
23
PF-M25 – PF-M100
Parallel
Commissioning