AUMA AUMATIC ACExC 01.2, Руководство по эксплуатации, Страница: 59 / 92

Table 13: Faults and warnings via status indications in the display
For indicated value > 0: Description/cause Indication on display
Press push button Details .
For details, refer to <Warnings and Out of
specification> table.
Collective signal 02:
Indicates the number of active warnings. Warnings S0005
Press push button Details .
For details, refer to <Not ready REMOTE and
Function check> table.
Collective signal 04:
Indicates the number of active signals. Not ready REMOTE S0006
Press push button Details to display a list
of detailed indications.
For details, refer to <Faults and Failure> table.
Collective signal 03:
Indicates the number of active faults.
The actuator cannot be operated. Fault S0007
Press push button Details .
For details refer to <Warnings and Out of
specification> table.
Collective signal 07:
Indication according to NAMUR recommenda-
tion NE 107
Actuator is operated outside the normal ope-
ration conditions. Out of specification S0008
Press push button Details .
For details, refer to <Not ready REMOTE and
Function check> table.
Collective signal 08:
Indication according to NAMUR recommenda-
tion NE 107
The actuator is being worked on; output si-
gnals are temporarily invalid. Function check S0009
Press push button Details to display a list
of detailed indications.
Collective signal 09:
Indication according to NAMUR recommenda-
tion NE 107
Recommendation to perform maintenance. Maintenance required S0010
Press push button Details to display a list
of detailed indications.
For details, refer to <Faults and Failure> table.
Collective signal 10:
Indication according to NAMUR recommenda-
tion NE 107
Actuator function failure, output signals are
invalid Failure S0011
Table 14: Warnings and Out of specification
Remedy Description/cause Indication on display
Press push button Details to display a list
of individual indications.
For a description of the individual signals, refer
to Manual (Operation and setting).
Collective signal 06:
Possible cause:
Configuration setting is incorrect.
The device can still be operated with restricti-
ons. Config. warning
Press push button Details to display a list
of individual indications.
For a description of the individual signals, refer
to Manual (Operation and setting).
Collective signal 15:
Device warnings
The device can still be operated with restricti-
ons. Internal warning
Check 24 V DC voltage supply. The external 24 V DC voltage supply of the
controls has exceeded the power supply limits. 24 V DC external
●
Check modulating behaviour of actuator.
●
Check parameter Perm. running time/h
M0356 , re-set if required.
Warning on time max. running time/h excee-
ded Wrn on time running
●
Check modulating behaviour of actuator.
●
Check parameter Permissible starts/h
M0357 , re-set if required.
Warning on time max. number of motor starts
(starts) exceeded Wrn on time starts
Verify signals:
●
Setpoint E1
●
Actual value E2
●
Actual process value E4
●
Check connection to master.
The failure behaviour is active since all requi-
red setpoints and actual values are incorrect. Failure behav. active
Check wiring. Warning: Loss of signal analogue input 1 Wrn input AIN 1
Check wiring. Warning: Loss of signal analogue input 2 Wrn input AIN 2
59
SGExC 05.1 – SGExC 12.1 Control unit: electromechanic
ACExC 01.2 Intrusive Modbus RTU
Corrective action