manualshive.com logo in svg

AUMA AUMATIC ACExC 01.2, Руководство по эксплуатации, Страница: 15 / 92

Поделиться
Скачать
AUMA AUMATIC ACExC 01.2 Скачать руководство пользователя страница 15

4.4.1

Mounting positions: modify

Flameproof enclosure, danger of explosion!

Risk of death or serious injury.

→

Before opening, ensure that there is no explosive gas and no voltage.

→

Handle cover and housing parts with care.

→

Joint surfaces must not be damaged or soiled in any way.

→

Do not jam cover during fitting.

Electrostatic discharge ESD!

Risk of damage to electronic components.

→

Earth both operators and devices.

1.

Loosen screws and remove the local controls.

2.

Check whether O-ring is in good condition, correctly insert O-ring.

3.

Turn local controls into new position and re-place.

Cable damage due to twisting or pinching!

Risk of functional failures.

→

Turn local controls by a maximum of 180°.

→

Carefully assemble local controls to avoid pinching the cables.

4.

Fasten screws evenly crosswise.

15

SGExC 05.1 – SGExC 12.1 Control unit: electromechanic
ACExC 01.2 Intrusive Modbus RTU

Assembly

Содержание AUMATIC ACExC 01.2





























































































Отзывы:

Нет отзывов