manualshive.com logo in svg

AUMA ACE C 01.2 Profinet Series, Руководство пользователя

Поделиться
Скачать
AUMA ACE C 01.2 Profinet Series Скачать руководство пользователя страница 95

Features and functions

●

Valve overload protection: adjustable, results in switching off and generates fault signal

●

Motor temperature monitoring (thermal monitoring): results in switching off and generates fault indic-
ation

●

Monitoring the heater within actuator: generates warning signal

●

Monitoring of permissible on-time and number of starts: adjustable, generates warning signal

●

Operation time monitoring: adjustable, generates warning signal

●

Phase failure monitoring: results in switching off and generates fault signal

●

Automatic correction of rotation direction upon wrong phase sequence (3-ph AC current)

Monitoring functions

●

Electronic device ID with order and product data

●

Operating data logging: A resettable counter and a lifetime counter each for:

-

Motor running time, number of starts, torque switch trippings in end position CLOSED, limit
switch trippings in end position CLOSED, torque switch trippings in end position OPEN, limit
switch trippings in end position OPEN, torque faults CLOSE, torque faults OPEN, motor protection
trippings

●

Time-stamped event report with history for setting, operation and faults

●

Status signals according to NAMUR recommendation NE 107: "Failure", "Function check", "Out of
specification", "Maintenance required"

●

Torque characteristics (for version with MWG in actuator):

-

3 torque characteristics (torque-travel characteristic) for opening and closing directions can be
saved separately.

-

Torque characteristics stored can be shown on the display.

Diagnostic functions

PTC tripping device in combination with PTC thermistors within actuator motor

Standard:

Motor protection evaluation

Thermal overload relay in controls combined with thermoswitches within actuator

Option:

AUMA Ex plug/socket connector with screw-type terminals (KP), max. 38 control terminals
/ max. supply voltage 525 V AC

Standard:

Electrical connection

●

AUMA Ex plug/socket connector with terminal blocks (KES), increased safety Ex e

●

AUMA Ex plug/socket connector with terminal blocks (KES), flameproof enclosure Ex
d

●

AUMA Ex plug/socket connector (KT); screw-type motor terminals; push-in type control
terminals

Options:

Metric threads

Standard:

Threads for cable entries

Pg-threads, NPT-threads, G-threads

Options:

Refer to name plate

Wiring diagram

Further options for version with MWG in actuator

Setting of limit and torque switching via local controls

Via HART interface
Galvanically isolated analogue output 0/4 – 20 mA (load max. 500 

Ω

). Option, only possible in combin-

ation with output contacts.

Torque feedback signal

Refer to name plate

Wiring diagram

Setting/programming the HART interface

The HART address is set via HART command 6 or alternatively via the actuator controls (default value:
0)

Setting the HART address

95

SAEx 07.2 – SAEx 16.2/SAREx 07.2 – SAREx 16.2 Control unit: electronic (MWG)
ACExC 01.2 Non-Intrusive HART

Technical data

Содержание ACE C 01.2 Profinet Series

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды