or press <OK> for a drop down menu to
choose the aspect mode from, Auto /
4:3PS / 4:3LB / 16:9 and press <OK> to
select, or <EXIT> to cancel changing the
aspect mode.
Highlight Video Out and either press <◄>
or <►> to select the video output mode
in real time, or press <OK> for a drop down
menu to choose the video output mode from
CVBS / RGB and press <OK> to select, or
<EXIT> to cancel changing the video output
mode.
Highlight Digital Audio Out and either press
<◄> or <►> to select the digital audio
output mode, or press <OK> for a drop
down menu to choose the digital audio
output mode from BS Out / LPCM Out and
press <OK> to select, or <EXIT> to cancel
changing the digital audio output mode.
5.8.4.3 Display Setting
Display setting is used to alter the Brightness,
Contrast, Saturation, Hue and Sharpness of
the picture.
Highlight the option required and press <◄>
or <►> to select the level in real time, or
press <OK> for a drop down menu to choose
-19-
-18-
English
5.8.3.3 LCN
The LCN option is used to turn Logical
Channel Numbers On or Off.
5.8.4 System Setup
5.8.4.1 Language
Language is used to set the OSD language,
First audio language, Second audio language
and Teletext. Highlight the option, and press
<◄> or <►> to select the language for that
option.
5.8.4.2 TV System
TV System is used to change the Video
Resolution, Aspect Mode, Video Output
mode and Digital Audio Out mode.
Highlight Video Resolution and either
press <◄> or <►> to select the resolution
in real time, or press <OK> for a drop down
menu to choose the resolution from, By
Source / By Native TV / 480i / 480p / 576i /
576p / 720p_50 / 720p_60 / 1080i_25 /
1080i_30 / 1080p_50 / 1080p_60
/
1080p_25/
1080p_30/1080p_24, and press <OK> to
select, or <EXIT> to cancel changing the
resolution.
Highlight Aspect Mode and either press
<◄> or <►> to select the aspect mode,
When searching by Frequency, highlight
Frequency and enter the frequency in
Kilohertz using the number buttons on the
remote control. Set the bandwidth as
required for the local transmitter. Highlight
BandWidth press <◄ > or < ►> to select
the bandwidth from 6 MHz/7MHz/8MHz.
Note: The frequency in Kilohertz is
Megahertz multiplied 1000. i.e. to set
482MHz as the search frequency enter
“482000”. When the frequency is set, press
the <
▲
>
or <
▼
>
buttons to highlight
Search and press <OK> to start the search.
5.8.3.2 Auto Scan
Select Auto Scan and press <OK> to start
searching for channels on all frequencies.
The selected countries settings will be used.
Use this option if new channels have been
added to the local transmitter, or the receiver
has been moved to a different TV area.
the level and press <OK> to select, or
<EXIT> to cancel changing the value. The
levels vary between 0 and 100, except for
Sharpness which is 0 to 10.
5.8.4.4 Local Time Setting
Local Time Setting allows the user to
change the Region and time settings for the
device.
Highlight Region and press <◄> or <►>
to select the region, or press <OK> for a
drop down menu. Press <OK> to select, or
<EXIT> to cancel.
GMT Usage allows the user to change the
method of time setting for the device. Press
<◄> or <►> to select between By
Region / User Defined / Off. By Region
uses the Region setting, User Defined
allows the user to set the local time by
GMT offset, and Off allows the user to set
the date and time manually by using the
numeric buttons on the remote control.
