-22-
-23-
5.8.5.3 Othello
Press <OK> to play the Othello game.
Highlight “Start” and press <OK> to start a
new game. A pop up menu will ask “Do you
want to be the black side?”. Highlight “Yes”
and press <OK> to play black, or “No” and
press <OK> to play white. Black side starts
first.
Press the arrow keys to move the cursor to a
valid square and press <OK> to place a disc.
The DVB415 will then take it’s turn to place
a disc. The running total of discs for each
colour is displayed on screen. Continue
placing discs until one side wins.
Press <EXIT> to quit the game and return to
the Othello menu. A pop up window will
confirm that you want to quit.
Setup sets the level of the game. Press <OK>
to change between Class 1/2/3.
Highlight CANCEL and press <OK>, or
press <EXIT> to return to the Tools menu.
5.8.5.4 Sudoku
Press <OK> to play the Sudoku game.
Highlight “New Game” and press <OK> to
start a new game. Press the arrow keys to
move the cursor and press a number to enter
in the square. To abandon the game press
<EXIT>, then highlight “Yes” in the
confirmation window and press <OK>.
Select “Replay” to continue the current game.
not set this option to ON if your antenna
does not have an amplifier that takes 5V
input.
5.8.4.11.2 Auto Standby
Enabling auto-standby allows the device to
automatically go into standby mode after a
period of about 3 hours.
5.8.4.11.3 RF Loop In Standby
The device can provide a loop-through of
signal for a second receiver when it is in
standby mode. Press <◄> or <►> to
enable or disable this function.
5.8.5 Tools
5.8.5.1 Information
Press <OK> to display information on the
device mode and current software.
5.8.5.2 Factory Setting
Press <OK>, then press <◄> or <►> to
highlight “Yes” and press <OK> to reset the
device to factory default settings, or highlight
“No” and press <OK> or press <EXIT> to
return to the system menu.
Note:
Resetting to Factory Setting will erase
all memorized channels and user settings
from the device.
Select “Solve” to fill in all the squares and
see the solution.
To change the difficulty, highlight “Setup”
and press <OK> to cycle between level 1/2/3.
Select “Cancel” or press <EXIT> to return to
the Tools menu.
5.8.5.5 Upgrade By USB
This function is for manufacturers use only.
Warning: Damage to the unit can occur if a
wrong software version is uploaded.
5.8.5.6 Remove USB device safely
This option should be used before a USB
device is removed from the unit. Press <OK>
to bring up the Disk Remove menu and use
the arrow keys to highlight “OK” and press
<OK> to disconnect the USB device, or
“Cancel” and <OK> to leave the USB device
connected.
