-11-
⑤
⑥
⑦
⑧
Video PID: can be changed by pressing
the numbers.
PCR PID: can be changed by pressing
the numbers.
Once finish the settings, press ENTER
to confirm, it will show “Successfully
updated” and return to Edit Channels.
During setup, press EXIT at any time
to cancel and exit to Edit Channels.
5. To edit a channel, press YELLOW, and
then press UP/DOWN to select between
the 4 parameters as shown:
①
②
③
④
⑤
⑥
Channel Name: press RIGHT to enter
the edit page, use RED/GREEN/
YELLOW/BLUE to edit, press ENTER
to confirm.
Audio PID: can be changed by pressing
the numbers.
Video PID: can be changed by pressing
the numbers.
PCR PID: can be changed by pressing
the numbers.
Once finish the settings, press ENTER
to confirm, it will show “Successfully
updated” and return to Edit Channels.
During setup, press EXIT at any time to
cancel and exit to Edit Channels.
6.1.5 Delete All
To delete all the TV and Radio channels,
select MENU-> Digital TV->
Channel Manager-> Delete All.
1. It will ask you to enter the password,
the default one is 0000. After entering
the correct password, it allows you to
select to delete all TV channels or
Radio channels.
2. Use UP/DOWN to select TV channels,
it will ask “ Delete all TV channels?”,
select “Yes” to confirm and proceed
the delete, select “No” to cancel.
3. Use UP/DOWN to select Radio
channels, it will ask “ Delete all Radio
channels?”, select “Yes” to confirm and
proceed the delete, select “No” to cancel.
Installation is for searching TV and Radio
channels, it can be accessed by selecting
MENU-> Digital TV-> Installation.
6.2 Installation
Pressing ENTER, it gives two search
options: Auto Search and Manual Search.
-12-
6.2.1 Auto Search
Select Auto Search, press ENTER, it will
start the search.
After searching, the system will automatically
exit the searching page, save program
information and return to Installation menu,
press EXIT or MENU to exit.
6.2.2 Manual Search
If you know a channel's broadcasting
frequency and bandwidth, using manual
search to find the channel can be quicker.
Select Manual Search, press ENTER, it will
ask you to provide two parameters:
①
②
Freq (KHz): scanning frequency, the
default is 474000 KHz, use numbers
or LEFT/RIGHT to change.
Band Width: use LEFT/RIGHT to select.
After setting, press ENTER to start the search.
After searching, the system will automatically
exit the searching page, save program
information and return to Installation menu,
press EXIT or MENU to exit.
6.3 Configuration
Configuration menu has the following
options: On Screen Display, TV, System
Setup, Time, Wakeup Timer and Parental
Lock. It can be accessed by selecting
MENU->Digital TV->Configuration.
6.3.1 OSD (On Screen Display)
Through OSD, you can set the interface
pattern.
Left of the menu lists all the options under
OSD. Press UP/DOWN to select an option.
1. OSD: supports 5 menu patterns, press
LEFT/RIGHT to select between Theme1-5.
2. OSD Timeout: sets the display time of an
information dialog window, press
LEFT/RIGHT to select between 1-6
seconds, the system default is 3seconds.
3. OSD Trans: sets the diaphaneity of the
menu, press LEFT/RIGHT to adjust from
0%-60%.
4. OSD Language: the system supports
multi-language user interface, press RIGHT
to enter the language list, use UP/DOWN
to select, press ENTER to confirm.
