TIME
OFF TIME
-
ON TIME
-
:
:
:
C L O C K
SLEEP
0
COLOR SYS
-
S Y S T E M
AUTO
-23-
TIME
OFF TIME
-
ON TIME
-
:
:
:
C L O C K
SLEEP
0
11.4 System
Color-Sys: Press LEFT or RIGHT to select between AUTO, PAL, NTSC and
SECAM.
/
Select
/
Adjust
11.5 Clock
Press UP or DOWN to select between Sleep, Time, Off-Time, and On-Time
settings.
/
Select
/
Adjust
Sleep: The unit can be set to turn off automatically after certain time, press
LEFT or RIGHT to select from 0 to up to 240 minutes maximum with 10
minutes intervals.
Time: Press LEFT to change the hours, press RIGHT to change the minutes.
Off-Time: The unit can be set to turn off automatically, press LEFT to change
the hours, press RIGHT to change the minutes.
On-Time: The unit can be set to turn on automatically, press LEFT to change
the hours, press RIGHT to change the minutes.
/
Select
/
Adjust
-24-
Problems listed below do not necessarily signify a fault with the unit.
Please check this list before requesting repairs.
Problems
12. Troubleshooting
No picture and no sound
Check the connection with the AC adapter/Car adapter.
Use of an unauthorized power supply.
Power switch on the side of the TV is off.
TV is on standby as it was switched off by pressing the
POWER on remote.
Check the channel selection. Scan for channels again.
Always rescan for channels in new locations. Ensure
video settings are correct.
Check the sound volume. If you are using earphones,
test them on another item. Check that the cable is plugged
in. Sound System is not correctly set in Analogue TV mode.
Possible Causes and Solutions
Picture freezing, and/or
sound distorting
Signal too weak, please check the aerial. Try to use a
proper roof top aerial or an amplified aerial.
No signal
Signal too weak, please check the aerial. Try to use a
proper roof top aerial or an amplified aerial.
Please adjust Brightness and/or Contrast settings.
Dark Picture
Motors/Trains/High Voltage Lines and Neon Lights may
affect the signal.
Snowstorm
Achromatic/Flashing/No Colour
Please adjust the Colour Setting.
Color-Sys is not correctly set in Analogue TV mode.
No sound
No image
No user serviceable components are fitted inside this TV. Do not attempt
any repairs, as this will invalidate the warranty. Any repairs must be carried
out by either the manufacturer or their nominated service centre. Parts
inside this set are subject to high voltage.